Place of Origin: | Jiangsu,China |
Brand Name: | BLM |
Certification: | ISO |
Model Number: | BLM-S |
Minimum Order Quantity: | 100kgs |
---|---|
Price: | Negtation |
Packaging Details: | Packing with wooden box |
Delivery Time: | 25days |
Payment Terms: | T/T |
Supply Ability: | 5 tons per month |
Place Of Origin: | Jiangsu,China | Application: | Widely |
---|---|---|---|
Type: | Nickel Bar | Ni(Min): | 36 |
Model Number: | Invar 36 | ||
High Light: | Invar36 Nickel Bar,OLED Invar 36 Sheet,OLED Invar Sheet |
Invar36 Nilo 36 36h Sheet 34X250X500mm For OLED
1 . Description:
The name Invar comes from the word invariable, referring to its relative lack of expansion or contraction with temperature changes.
It was invented in 1896 by Swiss physicist Charles Édouard Guillaume. He received the Nobel Prize in Physics in 1920 for this discovery, which enabled improvements in scientific instruments.
OhmAlloy-4J36 (Invar) is used where high dimensional stability is required, such as precision instruments, clocks, seismic creep gauges, television shadow-mask frames, valves in motors, and antimagnetic watches. In land surveying, when first-order (high-precision) elevation leveling is to be performed, the Level staff (leveling rod) used is made of Invar, instead of wood, fiberglass, or other metals. Invar struts were used in some pistons to limit their thermal expansion inside their cylinders.
2 . Normal composition%
|
35~37.0 |
Fe |
Bal. |
Co |
- |
Si |
≤0.3 |
Mo |
- |
Cu |
- |
Cr |
- |
Mn |
0.2~0.6 |
C |
≤0.05 |
P |
≤0.02 |
S |
≤0.02 |
|
Typical Physical properties
|
8.1 |
Electrical resistivity at 20ºC(mm2/m) |
0.78 |
Temperature factor of resistivity(20ºC~200ºC)X10-6/ºC |
3.7~3.9 |
Thermal conductivity, λ/ W/(m*ºC) |
11 |
Curie point Tc/ ºC |
230 |
Elastic Modulus, E/ Gpa |
144 |
3 . Application
in radio and electronic devices,
manufacture parts in aircraft controls
optical and laser system
in bimetallic thermostats and in rod and tube assemblies for temperature regulators
4 . Typical Mechanical properties
|
Elongation |
Mpa |
% |
641 |
14 |
689 |
9 |
731 |
8 |
5 . Temperature factor of resistivity
Temperature range, ºC | 20~50 | 20~100 | 20~200 | 20~300 | 20~400 |
aR/ 103 *ºC | 1.8 | 1.7 | 1.4 | 1.2 | 1.0 |
The heat treatment process | |
Annealing for stress relief | Heated to 530~550ºC and hold 1~2 h. Cold down |
annealing | In order to eliminate hardening, which be bring out in cold-rolled, cold drawing process. Annealing needs heated to 830~880ºC in vacuum,hold 30 min. |
The stabilization process | In protective media and heated to 830 ºC, hold 20min. ~ 1h, quench Due to the stress generated by quenching, heated to 315ºC,hold 1~4h. |
Precautions |
Can not be hardened by heat treatment Surface treatment can be sandblasting, polishing or pickling. Alloy can be used 25% hydrochloric acid pickling solution at 70 ºC to clear oxidized surface |
Contact Person: Kitty
Tel: +8613914912658
Polished Duplex 2205 Round Bar , S31803 Stainless Steel Round Bar High Alloy Steels
Alloy Duplex 2507 Plate With Superior Chloride Pitting Resistance
S32900 Duplex Stainless Steel Bar / Rod For Desalination Equipment
S32760 Stainless Steel Metal Strips With Erosion Corrosion Resistance
15-5 PH Bar Precipitation Hardening Stainless Steel UNS S15500 Grade For Nuclear Waste Casks
High Toughness 17 4 Steel Plate , 17 4ph Plate For Shaft And Bearing
Low Carbon Content 17 7PH Plate With Superior Weldability 0.282 Lb / Inch3 Density
Stainless Steel Inconel 625 Bar With Stress Corrosion Cracking Resistance
8mm-100mm Thickness Inconel Nickel Alloy Plate , Inconel 718 Plate Mill Edge
Special Metals Inconel 718 Bar , Nickel Alloy 718 With Ending Machinability
Wonderful Machining And Welding Inconel 625 Material Nickel Plate Type