Send Message



Attitude Is Everything.Details Determine Success or Failure.


Home ProductsNitronic Alloys

High Strength Nitronic Alloys Strip With Excellent Corrosion Resistance

High Strength Nitronic Alloys Strip With Excellent Corrosion Resistance

High Strength Nitronic Alloys Strip With Excellent Corrosion Resistance
High Strength Nitronic Alloys Strip With Excellent Corrosion Resistance
High Strength Nitronic Alloys Strip With Excellent Corrosion Resistance
Product Details:
Place of Origin: Jiangsu, China (Mainland)
Brand Name: BLM-NC-1
Payment & Shipping Terms:
Minimum Order Quantity: Negotiation
Price: Negotiation
Packaging Details: packed and labeled according to the regulations and customer's requests.Great care is taken to avoid any damage which might otherwise be caused during storage or transportation.
Delivery Time: 25-30 days subject to the clients' requirement and quantity
Payment Terms: Western Union, L/C, T/T
Supply Ability: 300 Ton/Tons per Month
Contact Now
Detailed Product Description
Standard: AISI, ASTM, BS, DIN, GB, JIS, Other,JIS,AISI,ASTM,GB,DIN,EN Grade: Nitronic 50
Place Of Origin: Jiangsu, China (Mainland) Type: Strip
Special Use: Valve Steel Delivery: 25-30 Days Subject To The Clients' Requirements And Quantity
Surface Treatment: Bright&smooth Application: Structural Steel Bar
High Light:

nitronic 60 stainless steel


nitronic 50 material

High Strength And Good Corrosion Resistant Nitronic 50 Alloy Strip


In addition to the improved corrosion resistance, NITRONIC 50 can be welded successfully using conventional welding processes that are normally employed with the austenitic stainless steels, As with most stainless steels, good weld joint properties can be obtained without the necessity of preheat or postweld annealing. The matching weld filler (NITRONIC 50 AWS E/ER 209) for Armco NITRONIC 50 Stainless Steel is similar to many of the regular austenitic stainless steel filler metals in that a small percentage of magnetic ferrite phase has been introduced to as sure sound weld deposits. If the strength levels or superior corrosion resistance in the weld deposits are not required, other filler metals can be used to advantage because of reduced costs and/or ready availability. The small quantity of the second phase usually produces a magnetic permeability value of approximately 1.2 in shielded metal-arc weld deposits. This corresponds to a ferrite number (FN) of approximately 6. Highly overalloyed Ni base fillers are suggested for applications requiring high resistance to pitting media or very low asdeposited magnetic permeability.


Gas tungsten arc weld joints have been fused successfully in several fiat-rolled gauges of Armco NITRONIC 50 GTA Weld Joints (Cont.) Stainless Steel. Mechanical property values similar to those of the base metal have been obtained in the as-welded condition. The corrosion resistance of GTA welded joints has been evaluated using the standard Huey test (ASTM A 262, Practice C) for detecting intergranular attack in stainless steels. Laboratory test experience shows that welds made using the NITRONIC 50W Stainless Steel filler metal exhibit the same resistance to intergranular attack as the base metal.



Nitronic 50 Chemical composition:

Alloy % Ni Cr Fe C Mn Si N Mo Nb V P S
Nitronic 50 Min. 11.5 20.5 52   4   0.2 1.5 0.1 0.1    
Max. 13.5 23.5 62 0.06 6 1 0.4 3 0.3 0.3 0.04 0.03


Nitronic 50 Physical properties

Density 7.8g/cm3
Melting point 1415-1450 °C


Nitronic 50 Characteristic:

Nitronic 50 Stainless Steel provides a combination of corrosion resistance and strength not found in any other commercial material. This austenitic stainless steel has corrosion resistance greater than that provided by types 316, 316L, 317, 317L plus approximately twice the yield strength at room temperature. In addition, Nitronic 50 has very good mechanical properties at both elevated and sub-zero temperatures unlike many austenitic stainless steel grades.

Nitronic 50 does not become magnetic in cryogenic situations.

High Strength (HS) Nitronic 50 has a yield strength about three times that of 316 Stainless Steel.


Nitronic 50 Application field:

Used in petroleum, petrochemical, manure, chemical, nuclear fuel recycle, paper making, textile and food processing industries parts of furnace, combustion chamber, gas turbine and heat-treating facility connecting piece


High Strength Nitronic Alloys Strip With Excellent Corrosion Resistance 0


Contact Details
BLOOM(suzhou) Materials Co.,Ltd

Contact Person: Kara Liu

Tel: 0086-13914912658

Send your inquiry directly to us
Other Products