(UNS S21800 )Nitronic 60 alloys Stainless Steel welded bar/rod
1.Description:
Nitronic 60 is a high Silicon, high Manganese, Nitrogen strengthened austenitic stainless alloy. Nitronic 60 is an all purpose metal that was originally designed as a temperature alloy and therefore performs well at high temperature around 1800ºF. The additions of silicon and manganese assist to inhibit wear, galling and fretting even in the annealed condition. Through cold working Nitronic 60, it is possible to attain higher strengths, however it does not enhance the anti-galling properties. The oxidation resistance of Nitronic 60 is similar to Alloy 309 and far superior to Alloy 304.
Nitronic 60 is used in the Aerospace , Food and Drug, Oil Field, Petrochemical, Surgical and Chemical Processing Industries.
2.Corrosion Properties:
The corrosion resistance of Armco NITRONIC 60 Stainless Steel falls between that of types 304 and 316. However, experience shows that in a wear system, a galling or siezure failure occurs first, followed by dimensional loss due to wear, and finally corrosion. Galling and wear must be the first concerns of the design engineer. Although the general corrosion resistance of NITRONIC 60 is not quite as good as Type 316, it does offer better chloride pitting resistance, stress corrosion cracking resistance and crevice corrosion resistance than Type 316 in laboratory conditions. Corrosion tests are not normally performed with NITRONIC 60 High Strength.
